Description
The PROTAG programmer is the latest generation tool for reading, writing & cloning of transponders, smart keys & Mercedes IR keys.
This software will provide you access to the internal memory and configuration of many transponders. The PROTAG can be used for generation of keys by dump of immobilizer system of the vehicle (more than 1000 models are covered). The PROTAG also has the ability to prepare transponders to be programmed with diagnostic equipment.
Read / program / authenticate low frequency transponders LF 125-134 KHz
Available functionality for cloning of Megamos 13, Temic 11, Temic 12, Texas 4C, PIT ID33, Tiris 4D, Tiris 4E, Temic 8C & Hitag-2.
Reading & writing of all of the latest generation transponders from NXP® ( hitag-2, hitag-3, hitag-pro, hitag-aes ...), Texas® (DST-AES, CRAID-AES ....)
The PROTAG can also be used to scan & test remote keyless entry signals at 315mhz, 433mhz, 868mhz & 915mhz.
Features the ability to read/program/authenticate high frequency transponders HF 13.56 MHz
Other protocols:
ISO/IEC 14443 A/MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE PLUS and MIFARE DESFire
ISO/IEC 14443 B and FeliCa
ISO/IEC15693, ICODE
Radio Transceiver/Receiver/AnalyserOperating 300-348 MHz/ 387-464 MHz/ 779-928 MHz ISM/SRD bands
2-FSK, 4-FSK, GFSK, and MSK supported as well as OOK and flexible ASK shaping
New AVDI Interface or activate AMS is required to purchase this product.
KT010 software comes complimentary with the purchase of a Protag.
Specifications
SKU
6447
Manufacturer
ABRITES
Categories
CAR KEY PROGRAMMER
Model
ZN002
